Calibration of Intraoral 3-D Measurement System With Using Consummated Model Combined With Highly Accurate Data Pairs

View: 57 times / Time: 2025-03-27

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-1_1

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-2_1

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-3_1

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-4_1

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-5_1

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-6

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-7

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-8

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-9

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-10

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-11

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-12

13-IEEE-Transactions-on-Instrumentation-and-Measurement-2-13

Original link: https://ieeexplore.ieee.org/document/10274698

Disclaimer: The third-party literature content referenced in this article is provided solely for the purposes of academic exchange and information sharing. It does not represent our position or endorsement of any technical parameter comparisons (if applicable) mentioned herein. The related data and conclusions are derived from independent research, and we shall not be held liable for the objectivity or accuracy of such content under any legal jurisdiction.

Back